| № | Номер | Название | Опции | Альт |
|---|
| 1 | 87417387 | 4WD AXLE ASSY | Front, See Figure 06-02 - 06-08 | | | 1 | 87417387R | REMAN-AXLE | Remanufactured, 87417387 Axle | | | 1 | 87417387C | CORE-AXLE | Return Number, 87417387 Axle, Core, Use This Part Number To Return Core For Credit When Using A Remanufactured Assy. | | | 2 | 825-11418 | NUT,M18 x 1.5, Cl 8 | | | | 4 | 218-5351 | HYD CONNECTOR,3/4"-16, 37 Degree x 9/16"-18, O-Ring | Incl. Ref 4A | | | 3 | 496-81000 | WASHER,25/32" x 1 3/8" x .134", HDN | | | | 4a | 237-6006 | O-RING,0.078" Thk x 0.468" ID, -906, Cl 6, 90 Duro | | | | 5 | 218-5529 | ELBOW,45 Degree, 9/16" - 18 ORB x 3/4" - 16 JIC | Incl. Ref 5A | | | 5a | 237-6006 | O-RING,0.078" Thk x 0.468" ID, -906, Cl 6, 90 Duro | | | | 6 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | If Used | | | 7 | 800-44050 | SNAP RING,M50, Ext | | | | 8 | 191796A1 | WASHER,51.6mm ID x 92mm OD x 1.98mm Thk | 2 x 4 x 1/16 | | | 9 | 87404197 | PIVOT PIN,50mm OD x 426.5mm L | Pivot Pin | | | 10 | D123684 | WASHER,52.3mm ID x 114mm OD x 4.78mm Thk | Thrust, 2-1/2 x 4-1/2 x 3/16 | | | 11 | 367861A2 | DRIVE SHAFT | See Figure 06-09; Dana Brand; No Longer Available, Order 87405326 Driveshaft | | | 11 | 87405326 | DRIVE SHAFT | Neapco Brand; Component Parts Not Available | | | 13 | 137223A2 | GUARD | Drive Shaft, Used On Models With 31 Gallon Fuel Tank | | | 14 | 827-12045 | BOLT,Hex, M12 x 1.75 x 45mm, Cl 10.9, Full Thd | | | | 15 | 495-81025 | WASHER,13.49mm ID x 31.75mm OD x 4.93mm Thk | | | | 16 | 90-6682T1 | CLAMP | | | | 17 | 9637611 | SCREW,Hex Flng, 5/16" - 24 x 3/4" | Hex Flange Head, Special, 5/16 - 24 UNF x 1-1/16; Replaces D137627 Bolt | | | 18 | 282038A2 | GUARD | Drive Shaft, Used on Models with 40 Gallon Fuel Tank | | | 19 | 282033A1 | BRACKET | | | | 20 | 495-81025 | WASHER,13.49mm ID x 31.75mm OD x 4.93mm Thk | | | | 21 | 827-12045 | BOLT,Hex, M12 x 1.75 x 45mm, Cl 10.9, Full Thd | | | | 22 | 829-1412 | NUT,M12, Cl 10.9 | | | | 26 | 218-5053 | HYD CONNECTOR,7/16" - 20 JIC x 7/16" - 20 ORB | Incl. Ref 27; If Used | | | 27 | 237-6004 | O-RING,0.072" Thk x 0.351" ID, -904, Cl 6, 90 Duro | | | | 28 | 87433730 | HOSE ASSY.,3.17mm ID x 500mm L | 500 mm (19-11/16 in), Lubrication Line; If Used | | | 29 | 218-1275 | NUT,Blkhd, 7/16"-20 | If Used | | | 31 | 381442A1 | CONNECTION | Lubrication Line; If Used | | | 30 | 495-11047 | WASHER,7/16", SAE | | | | 32 | 614-12025 | BOLT,Hex, M12 x 1.75 x 25mm, Cl 8.8, Full Thd | | | | 33 | 218-5103 | 90 ELBOW,90 Degree Elbow, 7/16" - 20 Male JIC x 7/16" - 20 Male ORB | Incl. Ref 34; If Used | | | 35 | 87572760 | HOSE ASSY.,6.4mm ID x 533mm L | 7/16-20 Female Swivel x 1/8 NPSN x 21 inch; Remote Lube; Includes Grease Fitting; If Used | | | 34 | 237-6004 | O-RING,0.072" Thk x 0.351" ID, -904, Cl 6, 90 Duro | | | | 36 | F53473 | LOCK NUT,1/8-27 NPSM | Hex; If Used | |
|
|