| № | Номер | Название | Опции | Альт |
|---|
| 1 | A184542 | COOLER, OIL | COOLER oil, transaxle shuttle | | | | torque converter, and equipment hydraulic oil, for equipment hydraulic oil cooler lines, see Figures 8-012 and 8-014, for oil cooler used on models with auxiliary hydraulics for optional rear hydraulics attachments, see Ref. 29 cooler on Fig. 8-14 | | | | 2 | 614-8016 | BOLT,Hex, M8 x 1.25 x 16mm, Cl 8.8, Full Thd | hex, 8 - 1.25 x 16 mm | | | 3 | 492-11031 | LOCK WASHER,5/16" | WASHER, LOCK, 5/16" | | | 4 | 495-11034 | WASHER,5/16", SAE | 5/16" SAE (flat, 11/32 x 11/16 x 1/16") | | | 5 | 114353A1 | BRACKET | mounting, oil cooler to radiator shroud, left-hand, replaces D131921 bracket | | | 6 | 114352A1 | BRACKET | mounting, oil cooler to radiator shroud, right-hand, replaces D131920 bracket | | | 7 | 413-616 | BOLT,Hex, 3/8" - 16 x 1", Gr 5 | hex, 3/8 NC x 1 inch, Bracket to oil cooler | | | 8 | 492-11038 | LOCK WASHER,3/8" | | | | 9 | 425-106 | NUT,3/8"-16, Cl 5 | | | | 10 | 413-628 | BOLT,Hex, 3/8" - 16 x 1-3/4", Gr 5 | Bracket to radiator shroud, radiator shroud may have mounting hole or slot, this bolt used without Ref. 11A or 11B in mounting hole Hex, 3/8"-16 x 1 3/4", G5 | | | 10a | 413-632 | BOLT,Hex, 3/8" - 16 x 2", Gr 5 | - hex, 3/8 NC x 2 inch, For radiator shroud with slot, used with Ref. 11A and 11B | | | 11 | D52275 | WASHER,9.92mm ID x 31.75mm OD x 2.78mm Thk | flat, 25/64 x 1-1/4 x 7/64 inch, hardened | | | 11a | D41740 | WASHER | flat, hardened | | | 11b | 495-11041 | WASHER,0.406" ID x 0.812" OD x 0.065" W | flat, (13/32 x 13/16 x 1/16"), Used with Ref. 10A in radiator shroud slot | | | 12 | D52276 | ISOLATOR,10.16mm ID x 28.07mm OD x mm L | INSULATOR vibration, rubber mount | | | 13 | 231-1446 | NUT,3/8" - 16, Gr 5 | NUT hex, self-locking, 3/8 inch NC, grade 8 | | | 14 | D146438 | HOSE,12.7mm ID x 365mm L | 365 mm long, at cooler inlet and outlet, models without auxiliary hydraulics for optional rear hydraulic attachments, if used | | | 15 | D146772 | HOSE | 400 mm long, at cooler inlet and outlet, models with auxiliary hydraulics for optional rear hydraulic attachments, if used | | | 16 | D146437 | TUBE | torque converter hose to cooler inlet hose | | | 17 | D146435 | TUBE | transaxle tube to cooler outlet hose | | | 18 | D143846 | CLAMP | - Double Tube | | | 19 | 413-620 | BOLT,Hex, 3/8" - 16 x 1-1/4", Gr 5 | hex, 3/8 NC x 1-1/4 inch | | | 20 | 492-11038 | LOCK WASHER,3/8" | | | | 21 | D149139 | SPACER | tube | | | 22 | 84899 | SQUARE NUT,Sq, 3/8"-16, G2 | square, 3/8 inch NC | | | 23 | D134007 | HOSE | 525 mm long, torque converter to cooler inlet, not used on models with PTO, uses Ref. 28 adapter on this page | | | 24 | D150129 | HOSE ASSY. | HOSE, 600 mm long, torque converter to cooler inlet, replaces Ref. 23 hose on models with PTO, uses Ref. 57 elbow on Figure 6-06 | | | 25 | 515-23190 | CLAMP,3/4", Insul, 3/8" Bolt | P, 3/4 inch diameter, models with PTO and without heater | | | 26 | 413-620 | BOLT,Hex, 3/8" - 16 x 1-1/4", Gr 5 | hex, 3/8 NC x 1-1/4 inch | | | 27 | 492-11038 | LOCK WASHER,3/8" | | | | 28 | 218-5059 | HYD CONNECTOR,3/4"-16, 37 Degree x 3/4"-16, O-Ring | ADAPTER straight, 3/4-16 inch flare x O-ring boss, use with item 23, D134007 hose, Incl. Ref 29 | | | 29 | 237-6008 | O-RING,0.087" Thk x 0.644" ID, -908, Cl 6, 90 Duro | 8-1, 90 Duro, .644" ID x .087" Thk | | | 30 | 218-585 | TEE,3/4"-16, 37 Degree x 1/2"-14, NPTF Fem Br | 1/2 female PT branch x 3/4-16 inch flare | |
|
|